Studer Vista 1 Operating Instructions Manual page 382

Vista 1 Digital Mixing System
Dual Stereo setup :
Quad Mono setup :
Single Two In Four Out setup :
Single Four In Four Out setup :
1-6 Vista 1 FX
This setup provides two stereo effect machines for one engine. It is suitable
for usage of a stereo effect, e.g. a stereo reverb. Since two machines are
avaialble, the user has the benefit of running two different stereo effects at
the same time. The stereo effect then can be used as a send-return effect, or
also as an insert effect for a stereo channel.
This provides four mono effect machines for one engine. It is the preffered
choice when using insert effects for mono channels. With both engines in this
setup, up to eight insert effects can be provided. Of course, also the combina-
tion of different setups per engine is possible (see screenshot above).
This setup can be used to create a four channel surround effect with a simple
stereo signal as the source. A nice way to create surround ambiance for a
stereo track.
This setup allows to create real surround effects. A 4.0 surround input signal
(L,R,Ls,Rs) will create a 4.0 effect signal.
When the setup procedure has been done for the two engines, the necessarry
input- and output ports are ready to be used in the general patch page.
Note : The engine setup is the base setup on which all later selected effects are
loaded. So changing the engine setup after effects have already been worked
with, will reset all effects and they will need to be reloaded again!
There is a warning window which informs about the consequences that the
changing of the engine setup will have :
SW V5.3 Document generated: 18.04.17