Studer Vista 1 Operating Instructions Manual page 253

Vista 1 Digital Mixing System
corner of the cuelist page. When right-clicking in this area, channels (i.e.,
characters), actors and library entries can be selected.
If the desired library setting has already been added to the actors' library, it
can be dialed up with the Setting Vistonics rotary and applied to that specific
channel in the current cue with the Apply key. If there are no other library
events further down the cue list, the applied library setting will remain active
in the channel through to the end of the cue list. If other library events have
already been applied to cues further down in the play, the new applied setting
will only be applied from the current cue to the one right before the cue where
the next library event is active.
Actor Overview... Window An overview window of all library events throughout all cues and all chan-
nels is shown by a click on the Actor Overview... button. In this window the
names of all entries are shown per cue. When right-clicking in this window,
the entries can be changed, and further entries can be added.
Other Events
During the different phases of rehearsing, other events can be added to the
cues as well:
MIDI program changes, note-on, note-off and MMC (MIDI machine control)
commands are available from the Configuration area once a MIDI event has
been added.
Plain notes,
blackout events,
GC Operation 4-77
Document generated: 18.04.17 SW V5.3