Table of Contents
Advertisement
4.5.7
Surveyor
4.5.8
Dynamic-Mode
4.5.9
log in (as System Administrator)
4.5.10
About
Document generated: 18.04.17
• Load the appropriate Monitor Configuration file;
• Activate the last used preferences belonging to the newly loaded Session
Configuration.
Notes:
When a cnfiguration is loaded via the Load Configuration menu, the currently
open Title will be closed; no new Title will be opened. Before any data can be
saved using the newly loaded configuration, an existing Title must be opened
or a new one must be created.
If a DSP configuration is displayed in red this means that this configuration
has not been compiled properly by the Session Configuration Tool. Either
run the tool again or delete this configuration.
Clicking the Surveyor menu item opens up the Surveyor window which
show the current state of the system. Please see
description.
The same Surveyor window is also opened when double-clicking on the
Application menu Surveyor icon.
This operation mode is not available fir the Vista 1.
Lets the operator log in as System Administrator by entering a password (if
defined at all). All greyed out SysAdmin menu items then become accessible.
Once logged in, this menu item automatically becomes the Log Out function,
which allows to leave the System Administrator mode again.
Refer to
chapter 4.7
When selected, this menu item displays information pertaining to that specific
Vista installation. This includes the software Release Number (version) and
the Build Number.
SW V5.3
Vista 1 Digital Mixing System
(system administration menu) for more details.
chapter 4.8
for a complete
GC Operation 4-103
Advertisement
Chapters
Table of Contents
