Studer Vista 1 Operating Instructions Manual page 238

Vista 1 Digital Mixing System
Timed Events
Dynamic Automation Events
4-62 GC Operation
For a timed event, the time until the next cue is recalled as well as the number
of the next recalled cue can be set. When clicking into the corresponding entry
field, the recall time can also be adjusted by moving the mouse or the touch
pad up/down (range: 0...60 seconds). A progress bar is shown in the large
cue area while the timer is running.
With dynamic automation events, automatic parameter changes can be
inserted into a cue, such as cross-fades, panorama or AUX level changes.
Programming such events is very convenient and easy. Dynamic automation
events are only used when working with the theatre cue list, therefore the
console has to be started in static rather than in dynamic mode.
After a click on the Dyn Auto icon in the cue list it is highlighted (blue back-
ground), and the Configuration area shows the controls used for the dynamic
automation, see below.
For recording, e.g., a fade-in, just click on the
tion system switches to record-pause mode, the record button's color changes
to red , and the
recording is then started either by touching a control (fader or rotary knob),
by pressing a key (e.g. MUTE), or by a click on the pause button. Once the
recording is complete, click on
SW V5.3
record button. The automa-
play button is replaced by
stop.
pause. Parameter
Document generated: 18.04.17