Mechanical Tests; Climatic Stress Tests - Siemens 7SC80 Manual

Technical Data
4.1 General Device Data

Mechanical Tests

4.1.6
Vibration and Shock Stress during Steady-State Operation
Standards:
Vibration
IEC 60255-21-1, class 2;
IEC 60068-2-6
Shock
IEC 60255-21-2, class 1;
IEC 60068-2-27
Seismic vibration
IEC 60255-21-3, class 2;
IEC 60068-3-3
Vibration and Shock Stress during Transport
Standards:
Vibration
IEC 60255-21-1, class 2;
IEC 60068-2-6
Shock
IEC 60255-21-2, class 1;
IEC 60068-2-27
Continuous shock
IEC 60255-21-2, class 1;
IEC 60068-2-29
4.1.7

Climatic Stress Tests

Temperatures
Standards:
Type tested (acc. IEC 60068-2-1 and -2, Test Bd, for
16 h)
Permissible temporary operating temperature
(tested for 96 h)
recommended for permanent operation (in acc.
with IEC 60255-1)
Limiting temperatures for storage
Limit temperatures for transport
506
IEC 60255-21
IEC 60068
IEC 60721
sinusoidal
10 Hz to 60 Hz: ±0.075 mm amplitude; 58 Hz to 150 Hz: 1g acceleration
frequency sweep rate 1 octave/min, 20 cycles in 3 orthogonal axes
semi-sinusoidal
acceleration 5 g, duration 11 ms, 3 shocks each in both directions of the 3
orthogonal axes
sinusoidal
3 Hz to 8 Hz: ±7.5 mm amplitude (horizontal axis)
3 Hz to 8 Hz: ±3.5 mm amplitude (vertical axis)
8 Hz to 35 Hz: 2 g acceleration (horizontal axis)
8 Hz to 35 Hz: 1 g acceleration (vertical axis)
frequency sweep rate 1 octave/min,
1 cycle in 3 orthogonal axes
IEC 60255-21
IEC 60068
IEC 60721
sinusoidal
5 Hz to 8 Hz: ±7.5 mm amplitude;
8 Hz to 150 Hz: 2 g acceleration
frequency sweep rate 1 octave/min,
20 cycles in 3 orthogonal axes
semi-sinusoidal
acceleration 15 g, duration 11 ms,
3 shocks in each direction of the 3 orthogonal axes
semi-sinusoidal
acceleration 10 g, duration 16 ms,
1000 shocks in each direction of the 3 orthogonal axes
IEC 60255-1 and IEC 60870
–50 °C to +85 °C
–40 °C to +70 °C
–40 °C to +55 °C
–25 °C to +55 °C
–20 °C to +70 °C
IEC 60870
IEC 60870
1,2)
1,3)
SIPROTEC Compact, 7SC80, Manual
E50417-G1140-C486-A8, Edition 07.2017