Siemens 7SC80 Manual page 409

Special Parameters in
Easy Setting GUI View
Fast Curve x Ground
Fast Curve x Phase
Time Dial
Fast Curve x Ground
Time Dial
Fast Curve x Phase
Reset
Fast Curve x Ground
Reset
Fast Curve x Phase
Time Adder
Fast Curve x Ground
Time Adder
Fast Curve x Ph
Minimum Operating
Time
Fast Curve x Gnd
Minimum Operating
Time
SIPROTEC Compact, 7SC80, Manual
E50417-G1140-C486-A8, Edition 07.2017
C Setting Options
IEC Curve - Normal Inverse
IEC Curve - Very Inverse
IEC Curve - Extremely Inverse
IEC Curve - Long Inverse
ANSI Curve - Inverse
ANSI Curve - Short Inverse
ANSI Curve - Long Inverse
ANSI Curve - Moderately Inverse
ANSI Curve - Very Inverse
ANSI Curve - Extremely Inverse
ANSI Curve - Definite Inverse
Recloser Curve - Curve A (101)
Recloser Curve - Curve B (117)
Recloser Curve - Curve C (133)
Recloser Curve - Curve D (116)
Recloser Curve - Curve E (132)
Recloser Curve - Curve K (162)
Recloser Curve - Curve N (104)
Recloser Curve - Curve R (105)
Recloser Curve - Curve W (138)
Recloser Curve - Curve 2 (135)
Recloser Curve - Curve 3 (140)
Recloser Curve - Curve 8 (113)
Recloser Curve - Curve 8* (111)
Recloser Curve - Curve 9 (131)
Recloser Curve - Curve 11 (141)
0.01 .. 20.00 sec; ∞
0.01 .. 20.00 sec; ∞
Instantaneous
Disk Emulation
Instantaneous
Disk Emulation
0.00 .. 30.00 sec
0.00 .. 30.00 sec
0.00 .. 30.00 sec
0.00 .. 30.00 sec
2.29 Recloser Setting Summary
Default Setting Description
IEC Curve - Set the trip curve type for
Normal Inverse the Fast curve x
ground.
0.50 sec Set the time dial for the
Fast curve x phase.
0.20 sec Set the time dial for the
Fast curve x ground.
Disk Emulation Set the reset characteristic
for the Fast curve x
phase.
Disk Emulation Set the reset characteristic
for the Fast curve x
ground.
0.00 sec Set the time adder for the
Fast curve x phase.
0.00 sec Set the time adder for the
Fast curve x ground.
0.01 sec Set the minimum oper-
ating time for the Fast
curve x phase.
0.01 sec Set the minimum oper-
ating time for the Fast
curve x ground.
Functions
409