Siemens 7SC80 Manual page 2

NOTE
i i
For your own safety, observe the warnings and safety instructions contained in this document, if available.
Disclaimer of Liability
before being published. It is revised at regular intervals,
and any modifications and amendments are included in the
subsequent issues. The content of this document has been
compiled for information purposes only. Although Siemens
AG has made best efforts to keep the document as precise
and up-to-date as possible, Siemens AG shall not assume
any liability for defects and damage which result through
use of the information contained herein.
This content does not form part of a contract or of business
relations; nor does it change these. All obligations of
Siemens AG are stated in the relevant contractual agree-
ments.
Siemens AG reserves the right to revise this document from
time to time.
Document Version Release 4.11.00
Release date: 07.2017
Copyright
Copyright © Siemens AG 2017. All rights reserved.
The disclosure, duplication, distribution and editing of this
document, or utilization and communication of the content
are not permitted, unless authorized in writing. All rights,
including rights created by patent grant or registration of a
utility model or a design, are reserved.
Registered Trademarks
SIPROTEC, SINAUT, SICAM and DIGSI are registered trade-
marks of Siemens AG. Any unauthorized use is illegal. All
other designations in this document can be trademarks
whose use by third parties for their own purposes can
infringe the rights of the owner.