Reassembly; Installation; General - Siemens 7SC80 Manual

[SC_7sc80-dd_with_extension-io, 1, --_--]
Figure 3-9
Only use original spare parts to replace the modules.
3.1.2.5

Reassembly

For assembly, perform the steps of the disassembly section in reverse order.
Install the device in the substation again. Slide the battery compartment back into the device.
Observe the following:
NOTE
i
i
Insert the current and voltage terminal blocks again and lock them in place!
Additionally fix the process terminals with the fixing elements or screws.

Installation

3.1.3
3.1.3.1

General

To install the 7SC80 device in a rack or cabinet, the two mounting brackets included in the delivery are
required.
SIPROTEC Compact, 7SC80, Manual
E50417-G1140-C486-A8, Edition 07.2017
Module fixing
Mounting and Commissioning
3.1 Mounting and Connections
461