Siemens 7SC80 Manual page 37

Addr. Parameter
116 67N/67N-TOC
117 Coldload Pickup
122 InrushRestraint
127 50 1Ph
130 S.Gnd.F.Dir.Ch
131 Sens. Gnd Fault
140 46
142 49
150 27/59
151 59N
153 47NPS
154 81 O/U
155 27/59 S2
156 81 O/U S2
161 25 Function 1
170 50BF
171 79 Auto Recl.
SIPROTEC Compact, 7SC80, Manual
E50417-G1140-C486-A8, Edition 07.2017
Setting Options
Disabled
Definite Time
TOC IEC
TOC ANSI
Recloser Curves
User Defined PU
User def. Reset
All Curves
Disabled
Enabled
Disabled
Enabled
Disabled
Enabled
cos φ / sin φ
V0/I0 φ mea.
Disabled
Definite Time
TOC IEC
TOC ANSI
User Defined PU
Disabled
TOC ANSI
TOC IEC
Definite Time
Disabled
No ambient temp
Disabled
Enabled
Disabled
Enabled
Disabled
Enabled
Disabled
Enabled
Disabled
Enabled
Disabled
Enabled
Disabled
SYNCHROCHECK
Disabled
Enabled
enabled w/ 3I0>
Enabled w/o I>
Disabled
Enabled
Default Setting Comments
Definite Time 67N, 67N-TOC
Disabled Cold Load Pickup
Disabled 2nd Harmonic Inrush Restraint
Disabled 50 1Ph
cos φ / sin φ (sens.) Ground fault dir. character-
istic
Disabled (sensitive) Ground fault
Disabled 46 Negative Sequence Protection
No ambient temp 49 Thermal Overload Protection
Disabled 27, 59 Under/Overvoltage Protec-
tion
Disabled 59N Displacement Voltage
Disabled 47 Negative Phase Sequence
Overvoltage
Disabled 81 Over/Underfrequency Protec-
tion
Disabled 27, 59 Under/Overvolt. Prot. Side2
Disabled 81 Over/Underfrequency Prot.
Side2
Disabled 25 Function group 1
Disabled 50BF Breaker Failure Protection
Disabled 79 Auto-Reclose Function
Functions
2.1 General
37