Usb File Download; File Management - NETGEAR GSM7252PS - ProSafe 52 Ports Gigabit Ethernet L2 Managed Stackable Switch User Manual

ProSafe® Gigabit L3 Managed Stackable Switches Software Administration Manual

USB File Download

Use this menu to download a file to the switch from a USB device.
To display this page, click Maintenance
1. Use File Type to specify what type of file you want to transfer:
a. Use Archive to specify archive (STK) code when you want to download to the
operational flash:
• Image1 - Specify the code image1 when you want to download.
• Image2 - Specify the code image2 when you want to download.
b. Use Text Configuration to specify configuration in text mode when you want to
update the switch's configuration. If the file has errors the update will be stopped.
The factory default is Image1.
2. Use USB File to specify a name along with path for the file you want to download. You may
enter up to 32 characters. The factory default is blank.
3. Download Status displays the status during transfer file to the switch.
4. The last row of the table is used to display information about the progress of the file transfer.
The screen will refresh automatically until the file transfer completes.

File Management

The system maintains two versions of the ProSafe® Managed Switches software in
permanent storage. One image is the active image, and the second image is the backup
image. The active image is loaded during subsequent switch restarts. This feature reduces
switch down time when upgrading or downgrading the ProSafe® Managed Switches
software.
The File Management menu contains links to the following options:
592 | Chapter 8. Maintenance
 
Download USB File Download.