View Diffserv Service Statistics - NETGEAR M7100 Series User Manual

Select QoS > DiffServ > Advanced > Service Interface Configuration.
7.
Use Interface to select the interface for the DiffServ service.
8.
Policy Name - Lists all the policy names from which one can be selected.
9.
This field is not shown for read/write users where the inbound service policy attachment
is not supported by the platform.
Table 204. Service Interface Configuration
Field
Direction
Operational Status

View DiffServ Service Statistics

This screen displays class-oriented statistical information for the policy, which is specified by
the interface and direction. The Member Class list is populated on the basis of the specified
interface and direction and hence the attached policy (if any). Highlighting a member class
name displays the statistical information for the policy-class instance for the specified
interface and direction.

To view the DiffServ service statistics:
Prepare your computer with a static IP address in the 169.254.100.0 subnet, for
1.
example, 169.254.100.201.
Connect an Ethernet cable from an Ethernet port on your computer to an Ethernet port on
2.
the switch.
Launch a web browser.
3.
Enter the IP address of the switch in the web browser address field.
4.
The default IP address of the switch is 169.254.100.100.
M6100, M5300, and M7100 Series Managed Switches
Description
Shows that the traffic direction of this service interface is In.
Shows the operational status of this service interface, either Up or
Down.
Configure Quality of Service
537