View Switch Information Or Change The Switch Device Name - NETGEAR GSS116E User Manual

Note: Models GSS108E and GSS108EPP provide 8 ports. Model GSS116E
provides 16 ports.
6. In the Destination Port section, select the destination port by selecting the check box under
the port number.
You can select a single destination port only. You cannot select a destination port that is a
member of a LAG.
7. In the Source Port section, select one or—depending on the model—more source ports by
selecting the check boxes under the port numbers.
For models GSS108E and GSS108EPP, you can select one source port only. For model
GSS116E, you can select more than one source port.
You cannot select a source port that is a member of a LAG.
8. Select the Mirror Status Enable radio button.
9. Click the Apply button.
Your settings are saved.
View Switch Information or Change the
Switch Device Name
You can view the switch product name (model), switch name, MAC address, firmware
version, DHCP mode, and IP address information.
You can also change the switch device name. This device name shows in, for example,
Windows Explorer and Bonjour.
To view information about the switch or change the switch device name:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired network connection, or connect directly to a switch that is
off-network using an Ethernet cable.
Manage and Monitor the Switch
8-Port and 16-Port Gigabit Ethernet Plus Click Switch
59 User Manual