Indirect Address Read Operations (Adrset(P)) - Mitsubishi MELSEC Q Series Programming Manual

ADRSET(P)
7.18.6

Indirect address read operations (ADRSET(P))

ADRSET(P)
ADRSET
ADRSETP
Setting
Data
S
D
Function
(1) Stores the indirect address of the device designated by
The address stored at the device designated by
is performed by the sequence program.
(2) A bit device designation cannot be made at
Operation Error
(1) There are no operation errors associated with the ADRSET(P) instruction.
Remark
7-394
Command
Command
: Number of the device whose indirect address is read out (Device name)
S
: Number of the device where the indirect address of the device designated by
D
Internal Devices
R, ZR
Bit Word
ADRSET W100 D100 Stores the address of W100 address to D101 and D100.
MOV K1234 @D100
Reads the contents of D100.
D0
D1
D100
D101
See Section 3.4 for further information on indirect designations.
High
Basic
performance
ADRSET
ADRSETP
J \
U \G
Bit Word
at
S
is used when an indirect device address
D
Writes 1234 to the address
specified by D100 and D101.
Address of W100
W100
.
S
Process
Redundant Universal LCPU
S D
S D
will be stored (BIN 32 bits)
S
Zn Constants Other
––
––
+1 and .
D D
Device area
1234