Conversion From Floating Decimal Point To Character String Data (Estr(P)) - Mitsubishi MELSEC Q Series Programming Manual

ESTR(P)
7.11.11
Conversion from floating decimal point to character string
data (ESTR(P))
ESTR(P)
ESTR
ESTRP
Setting
Data
S1
S2
*1:Available only in multiple Universal model QCPU and LCPU
Function
(1) Converts the 32-bit floating decimal point data designated by
according to the display designation specified by
starting from the device number designated by
(2) The post-conversion data differs depending on the display designation designated by
7-216
Basic model QCPU: The upper five digits of the serial No. are "04122" or larger.
Command
Command
: 32-bit floating decimal point data to be converted or head number of the devices where the data is stored
S1
(real number)
: Head number of the devices where display designation for the numerical value to be converted is stored (BIN 16 bits)
S2
: Head number of the devices where the converted character string will be stored (character string)
D
Internal Devices
R, ZR
Bit Word
––
––
––
D
0: Decimal point format
S2
1: Exponent format
Total number of digits
S2 +1
S2 Number of digits in decimal fraction
+2
Ver.
High
Basic
performance
ESTR S
ESTRP
S1
J \
U \G
Bit Word
––
–– ––
–– ––
S1
, and stores the result into the area
S2
.
D
The converted data differs depending
on the format selected at
Setting is possible in the range from 2 to 24.
Process
Redundant Universal LCPU
S2 D
S2 D
Constants
Zn Other
E
––
*1
–– –– ––
–– –– ––
to a character string
.
S2
S2
.