Mitsubishi MELSEC Q Series Programming Manual page 798

SP.FWRITE
Operation Error
(1) In any of the following cases, an operation error occurs, the error flag (SM0) turns ON, and
an error code is stored into SD0.
• Drive specified by drive designation device
card. (QCPU)
• Drive specified by drive designation device
Memory card. (LCPU)
• Values specified in control data
range.
• Value designated by "No. of request write data" (
exceeds the device range designated by (
• Empty space in the ATA card is insufficient. (QCPU)
• Empty space in the SD Memory card is insufficient. (LCPU)
• No free space is found when an attempt is made to create a new file.
• Invalid device is designated.
• Access error occurred in the ATA card. (QCPU)
• Access error occurred in the SD Memory card. (LCPU)
• An unusable value is set for a file name (
• The attribute of a file name (
• The device specified by
(For the Universal model QCPU, LCPU.)
7-424
contains the medium other than the ATA
S0
contains the medium other than the SD
S0
and the subsequent devices are out of the setting
D0
S2
+1) or the subsequent devices.
S2
).
S1
) is "read only".
S1
or exceeds the range of the corresponding device.
D1
D0
(Error code: 4100)
(Error code: 4100)
(Error code: 4100)
) is out of the setting range, or
(Error code: 4101)
(Error code: 4100)
(Error code: 4100)
(Error code: 4100)
(Error code: 4004)
(Error code: 4100)
(Error code: 4100)
(Error code: 4100)
(Error code: 4100)
(Error code: 4101)