Mitsubishi MELSEC Q Series Programming Manual page 1210

Common instruction 1/2

Hide thumbs Also See for MELSEC Q Series:

Table of Contents

Error individual

• This register stores individual information corresponding to

the error code stored in SD0.

• There are the following eight different types of information are

• The error individual information type can be determined by

"individual information category code" stored in SD4. (Values

stored in "individual information category code" correspond to

the following 1) to 8), 12), and 13).)

2) File name/drive name

(ASCII code: 8 characters)

(ASCII code: 3 characters)

3) Time (value actually measured)

4) Program error location

*6 For extension names, refer to the table on Page 199.

*7 The description of the bit pattern is as follows:

(Example) File name =

ABCDEFGH. IJK

b15 to b8 b7 to b0

Time : 1 s units (0 to 999 s)

Time : 1ms units (0 to 65535ms)

(ASCII code: 8 characters)

(ASCII code: 3 characters)

Step No./transition No.

Sequence step No. (L)

Sequence step No. (H)

(Bit number)

SFC block designation present (1)/absent (0)

SFC step designation present (1)/absent (0)

SFC transition designation present (1)/absent (0)

(To the next page)

Show Quick Links

Chapters

Table of Contents

Melsec l series