Mitsubishi MELSEC Q Series Programming Manual page 790

SP.FWRITE
Setting
Data
+6
D0
D0
+7
D0
Head number of the devices storing a file name. A file name is expressed as follows:
Device
S1
to
S1
+
S1
Head number of the devices storing the data. Written data is expressed as follows:
Device
S2
S2
+1 to
S2
+
S2
Bit device that turned ON at the completion of the processing.
( +1 is also turned ON at error completion.)
D1
Device
D1
D1
+1
D1
7-416
Meaning
When binary write is specified at
set 0.
When CSV format write is specified at
No. of
set the number of columns where data will be
columns
written.
designation
0 : No columns. Regarded as
one row.
Other than 0 : Set to the specified number of
columns.
Data type 0: Word
specification
1: Byte
Item Contents/Setting Data
Designate the character string of a file name.
• When omitting an extension, also omit
the "." (Period).
File name • Limit the file name within 8 characters +
character period + 3 characters.
string • When 9 or more characters are used,
the extension is ignored regardless of its
presence, and "BIN" or "CSV" is
automatically assigned as an extension.
Item Contents/Setting Data
Designate the number of data to request
writing (word units).
No. of
This data should be designated in units of
request
words even when byte is designated by
write data
+7.
D0
Write data Data to request writing.
Item Contents/Setting Data
Completion Indicates the completion of the processing.
signal ON: Completed OFF: Not completed
Indicates whether the processing is normally
Error
completed or abnormally completed.
completion
ON: Error completion
signal
OFF: Normal completion
*2: Indicates the range applicable only for the Universal model QCPU and LCPU.
Setting Range Set by
, always
D0
,
D0
0 to
H
FFFF
H
(0 to 65535)
0,1
Setting Range Set by
Character
string
Setting Range Set by
1 to 480
*2
1 to 32767
0000 to
H
FFFF
H
Setting Range Set by
––
System
––
Data Type
User
User
BIN 16 bits
User
User
Bit