Mitsubishi MELSEC Q Series Programming Manual page 783

(2) Specify the start I/O number of a module whose model name is to be read by "n" as follows:
• Specify the value obtained by dividing the start I/O number of the target module by 16.
Universal model QCPU
Power
CPU
QX10 QX10 QX10 QX10
supply
module
module
3E00 0000 0010
H H
When the target module is a CPU module itself,
specify the start I/O number by H3E0.
LCPU (L26CPU-BT)
Power
supply CPU Built-in Built-in
module
I/0 CC-Link
0000 0010
H
Specify H3E0 to read the module name of the CPU module.
1. On the LCPU, if the built-in I/O or first I/O on the built-in CC-Link is specified,
then the model name of the CPU module is read.
• When the target module occupies two slots
The start I/O number to be specified may differ from that of the mounted module.
For the start I/O number, refer to the manual of each module.
Specify the value obtained by dividing the start I/O number of the target module by 16.
Example) QJ71GP21S-SX
Specify a value to which 0010
Power
CPU
supply QJ71G P21S-SX Empty Empty Empty Empty Empty Empty
module
module
3E00 0000 0010
H H H
Q68 QY41
QY10 QY10
ADV P
0020 0030 0040 0050 0070
H H H H H
Specify the start I/O number by K3 or H3.
LX40 LX40 LX40 LX40 L60A
C6 C6 C6 C6 D4
0030 0040 0050 0060 0070
H H H H H
Specify the head I/O number to be read
by K6 or H6.
, start I/O number of the mounted module, is added.
H
0030 0040 0050 0060 0070
H H H H
Specify the start I/O number by K1 or H1.
0080 Start I/O number configured in
H H
the I/O assignment setting
LY10 LY10 LY10
R2 R2 R2
0090 00A0 00B0 Head I/O number
H H H H
configured in the
I/O assignment
setting
0080 Start I/O number configured in
H H
the I/O assignment setting
1
2
3
4
6
6
7
8
7-409