Mitsubishi MELSEC Q Series Programming Manual page 456

NDIS(P),NUNI(P)
(2) The number of dissociated bits designated at
bits.
(3) Bits from the device number designated at
processed as dissociated bits.
(4) Do not overlap the device range for data to be dissociated(
device range which stores the dissociated data (
correct operation result may not be obtained.
(5) Do not specify the same device number for
for
S1
NUNI
(1) Links individual bits of data stored into the area starting from the device number designated
by
S1
designated by
S2
S2 +1
+2
S2
S2 +3
+4
S2
+5
S2
S2 +6
S2 +7
S 1
S 1 +1
S 1 +2
S 1
+3
S 1 +4
S 1 +5
S 1
+6
(2) The number of bits to be linked as designated by
(3) Processing will be performed on the number of bits to be linked from the device number
designated by
(4) Do not overlap the device range for data to be linked(
range which stores the linked data (
operation result may not be obtained.
(5) Do not overlap the device numbers to be designated at
operation is not possible.
7-82
, , and , the operation does not work correctly.
S2 D
in the number of bits specified by
.
D
Designation of the number of linked bits
6
8
6
4
8
10
3
0 Designation of the end of setting
b5 b0
b7 b0
b5 b0
b4 b0
b7 b0
b9 b0
b2 b0
to the device number storing "0".
S2
can be designated within a range of 1 to 16
S2
to the device number where "0" is stored are
S2
S1
to end range of
D
, , and . If the same device is specified
S1 S2 D
, and stores them following the device number
S2
b15b14b13
D
Number of bits
designated at S2
Number of bits
S2
designated at +1
b15
D
Number of bits
S2
designated at +2
Number of bits
S2
designated at +3
Number of bits
S2
designated at +4
D
Number of bits
S2
designated at +5
Number of bits
S2
designated at +6
can be within a range of from 1 to 16.
S2
to end range of
S1
to end range of ). If overlapped, the correct
D D
,
S1 S2
to end range of ) with the
S1
). If overlapped, the
D
b6 b5 b0
b8 b7 b4 b3 b0
b12 b10 b0
) with the device
S1
and . If overlapped, correct
D