Mitsubishi MELSEC Q Series Programming Manual page 344

DI,EI,IMASK
Operation Error
(1) In the following case, an operation error occurs, the error flag (SM0) turns ON, and an error
code is stored into SD0.
• The device specified by
(For the Universal model QCPU, LCPU.)
Program Example
(1) The following program creates an execution enabled state for the interrupt program marked
by the interrupt pointer number when X0 is ON.
[Ladder Mode]
6-142
exceeds the range of the corresponding device.
S
[List Mode]
Step
(Error code: 4101)
Instruction Device