Clock Comparison (Tm=,Tm<>,Tm>,Tm<=,Tm<,Tm>=) - Mitsubishi MELSEC Q Series Programming Manual

(TM=,TM<>,TM>,TM<=,TM<,TM>=)
7.15.8
Clock comparison (TM=,TM<>,TM>,TM<=,TM<,TM>=)
(TM=,TM<>,TM>,TM<=,TM<,TM>=)
(TM=,TM<>,TM>,TM<=,TM<,TM>=)
LD
AND
OR
Setting
Data
S1
S2
n
Function
(1) This instruction compares the clock data specified by
clock data specified by
compared.
(a) Comparison of given clock data
7-360
indicates an instruction symbol of
Command
Command
: Head number of the devices where the data to be compared are stored (BIN 16 bits)
S1
: Head number of the devices where the data to be compared are stored (BIN 16 bits)
S2
n : Value of the data to be compared or the number of the stored data to be compared (BIN 16 bits)
Internal Devices
R, ZR
Bit Word
––
––
––
with the current time data. Setting n determines the data to be
S1
• This instruction treats the clock data specified by
as a normally open contact, and compares the data in accordance with the value
S1
of n.
Data range
S1 Hour
（0∼23）
S1 Minute
（0∼59）
＋1
S1 Second
（0∼59）
＋2
High
Basic
performance
QnU(D)(H)CPU: The serial number (first five digits) is "10102" or later.
QnUDE(H)CPU: The serial number (first five digits) is "10102" or later.
DT＝/DT＜＞/DT＜/DT＜＝/DT＞/DT＞＝
S1 S2
S1 S2
S1 S2
J \
U \G
Bit Word
––
––
with those specified by
S1
and the clock data specified by
S1
S2 Hour
Comparison
S2 Minute
＋1
operator
S2 Second
＋2
Ver.
Process
Redundant Universal LCPU
.
n
n
n
Constants
Zn Other
K, H
–– ––
–– ––
––
, or the
S1
Data range
（0∼23）
Comparison
（0∼59）
operation result
（0∼59）