Mitsubishi MELSEC Q Series Programming Manual page 452

DIS(P)
Operation Error
(1) In any of the following cases, an operation error occurs, the error flag (SM0) turns ON, and
an error code is stored into SD0.
• The range n-points from
• The value of n is outside the 0 to 4 range.
Program Example
(1) The following program dissociates the 16-bit data from D0 into 4-bit groups, and stores from
D10 to D13 when X0 is ON.
[Ladder Mode]
[Operation]
b15
D0 1 1 0 0 1 0 0 1 0 1 0 1 0 0 0 1
7-78
exceeds the relevant device.
D
b12 b11 b8 b7 b4 b3 b0
[List Mode]
Step Instruction
b15 b4 b3 b2
D10 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1
D11 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 1
D12 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 1
D13 0 0 0 0 0 0 0 0 0 0 0 0 1 1 0 0
Filled with 0s. Storage area
(Error code: 4101)
(Error code: 4100)
Device
b1 b0