Mitsubishi MELSEC Q Series Programming Manual page 277

Operation Error
(1) In any of the following cases, an operation error occurs, the error flag (SM0) turns ON, and
an error code is stored into SD0.
• The data of
• The data of
Program Example
(1) The following program outputs the present value of C4 from Y20 to Y2F to the BCD display
device.
Output
power supply
[Ladder Mode]
(2) The following program outputs 32-bit data from D0 to D1 to Y40 to Y67.
Y67 to Y64 Y63 to Y60
Output
power supply
[Ladder Mode]
is other than 0 to 9999 at BCD instruction.
S
or +1 is other than 0 to 99999999 at DBCD instruction.
S S
Programmable Controller Output Module
0 1 0 1 0 1 1 0 0 1 1 1
7-segment display unit
Programmable Controller Output Module
Y5F to Y5C Y5B to Y58 Y57 to Y54
7-segment display unit
1 0 0 0
[List Mode]
Instruction
Step
Y53 to Y50 Y4F to Y4C Y4B to Y48
[List Mode]
Instruction
Step
BCD(P), DBCD(P)
(Error code: 4100)
(Error code: 4100)
Device
Y47 to Y44 Y43 to Y40
Device
6-75
1
2
3
4
4
6
7
8