Mitsubishi MELSEC Q Series Programming Manual page 467

Common instruction 1/2

Hide thumbs Also See for MELSEC Q Series:

Table of Contents

(1) Searches in the n points of 32-bit BIN data, from the device designated by

minimum value and stores searched minimum value at the devices designated by

Starts the search from the device designated by

number of points counted from

+2 and stores the number of the found minimum values at

Operation Error

(1) In any of the following cases, an operation error occurs, the error flag (SM0) turns ON, and

an error code is stored into SD0.

• The n-bit range from the device specified by

• The device specified by

(For the Universal model QCPU, LCPU.)

Program Example

(1) The following program adds, when X1C is turned ON, the data stored at D100 to D103 and

the data stored at R0 to R3, and searches in the results of addition for the minimum value,

then, stores it at D200 to D202.

[Ladder Mode]

, of the device where the minimum value is found first at

22342001 (BIN)

37282010 (BIN)

22342001 (BIN)

59872019 (BIN)

exceeds the range of the corresponding device.

and stores the location, specified in the

22342001 (BIN)

exceeds the range of the corresponding

MIN(P),DMIN(P)

Minimum value

(Error code: 4101)

Minimum value

Show Quick Links

Chapters

Table of Contents

Melsec l series