Mitsubishi MELSEC Q Series Programming Manual page 294

GRY(P),DGRY(P)
Operation Error
(1) In the following case, an operation error occurs, the error flag (SM0) turns ON, and an error
code is stored into SD0.
• The data at
Program Example
(1) The following program converts the BIN data at D100 to Gray code when X10 is ON, and
stores result at D200.
[Ladder Mode]
(2) The following program converts the BIN data at D10 and D11 to Gray code when X1C is ON,
and stores it at D100 and D101.
[Ladder Mode]
6-92
is a negative number.
S
[List Mode]
Step Instruction
[List Mode]
Step Instruction
(Error code: 4100)
Device
Device