Mitsubishi MELSEC Q Series Programming Manual page 322

BMOV(P)
Caution
While SM237 is on, do not make the following access.
• The indexing target exceeds the device range.
• The value obtained from "
• Accessing the file register with file register not set.
• Accessing the area where the multiple CPU high speed transmission area device is not
available (only for the QCPU).
*1:
Operation Error
(1) In any of the following cases, an operation error occurs, the error flag (SM0) turns ON, and
an error code is stored into SD0.
• The device range of n points from
6-120
to
D
Refer to the DFMOV instruction.
SM237 can be used only for the Universal model QCPU whose first 5 digits of
serial number is 10012 or later and LCPU.
+ (n) - 1" is over the boundaries of the device ranges.
D
or exceeds the corresponding device range.
D
S
(Error code: 4101)