Conversion From Floating-Point Radian To Angle (Single Precision) (Deg(P)) - Mitsubishi MELSEC Q Series Programming Manual

Common instruction 1/2

Hide thumbs Also See for MELSEC Q Series:

Table of Contents

Conversion from floating-point radian to angle

(Single precision) (DEG(P))

(1) Converts units of angle size from radian units designated by

at device number designated by

(2) The conversion from radians to angles is performed according to the following equation:

Basic model QCPU: The upper five digits of the serial No. are "04122" or larger.

: Radian angle to be converted to degrees or head number of the devices where the radian angle is stored

(real number)

: Head number of the devices where the value converted in degrees will be stored (real number)

Internal Devices

32-bit floating-point

Degree unit = Radian unit x 180

*1: Applicable for the Universal model QCPU, LCPU.

32-bit floating-point

Redundant Universal

to angles, and stores result

Show Quick Links

Chapters

Table of Contents

Melsec l series