Mitsubishi MELSEC Q Series Programming Manual page 738

Common instruction 1/2

Hide thumbs Also See for MELSEC Q Series:

Table of Contents

(TM=,TM<>,TM>,TM<=,TM<,TM>=)

Program Example

(1) The following program compares the data stored in D0 with the data (hour, minute, and

second) stored in D10, and makes Y33 be conductive status when the data stored in D0

meet the data stored in D10.

[Ladder Mode]

(2) The following program compares the data stored in D0 with the current time data (hour and

minute), and makes Y33 be conductive status when the data stored in D0 do not meet the

current date data, when M0 is turned on.

[Ladder Mode]

(3) The following program compares the data stored in D0 with the data (hour and second)

stored in D10, and makes Y33 be conductive status when the data value stored in D10 is

smaller than the data value stored in D0, when M0 is turned on.

[Ladder Mode]

(4) The following program compares the data stored in D0 with the current time data (hour), and

makes Y33 be conductive status when the value of the current time data is the data value

stored in D0 or larger.

[Ladder Mode]

Show Quick Links

Chapters

Table of Contents

Melsec l series