Mitsubishi MELSEC Q Series Programming Manual page 636

ASIN(P)
Operation Error
(1) In any of the following cases, an operation error occurs, the error flag (SM0) turns ON, and
an error code is stored into SD0.
• The value designated by
• The contents of the designated device or the result of the addition are not "0", or not within
the following range(For the Universal model QCPU, LCPU):
0, 2
• The value of the specified device is
(For the High Performance model QCPU, Process CPU, Redundant CPU)
*2: There are CPU modules that will not result in an operation error if
• The result exceeds the following range (Operation results in an overflow)
(For the Universal model QCPU, LCPU)
128
2
• The value of the specified device is
(For the Universal model QCPU, LCPU)
7-262
is outside the range of from
S
-126
| Contents of designated device | < 2
| Operation result |
1.0 to 1.0. (Error code: 4100)
128
*2
0.
0 is specified. Refer to 3.2.4 for details.
0, unnormalized number, nonnumeric, and ±
(Error code: 4140)
(Error code: 4100)
(Error code: 4141)
.
(Error code: 4140)