Mitsubishi MELSEC Q Series Programming Manual page 800

SP.FWRITE
(2) When X10 is turned ON, the following program creates a file named "ABCD.CSV" in the
memory card inserted to drive 1, and writes four bytes of data (00
two-column table data in CSV format.
• The written file is displayed as follows:
[Ladder Mode]
[List Mode]
Step Instruction
• Assume that 8 points from
7-426
Device
are reserved for the control data devices.
D0
0
, 1 , CR LF
Contents of the file to be written
2 , 3 , CR LF
Data to be read to the EXCEL file
, 01
H H
Sets the execution/completion type
Sets the designation of the number of columns
Sets the data type specified
Sets the file name
Sets the number of request write data
Sets the data to be written.
Normal completion display
Error completion display
, 02 , and 03 ) as
H H