Batch Reset Of Bit Devices (Bkrst(P)) - Mitsubishi MELSEC Q Series Programming Manual

Common instruction 1/2

Hide thumbs Also See for MELSEC Q Series:

Table of Contents

Batch reset of bit devices (BKRST(P))

(1) Resets bit device n-points from the bit device designated by

Annunciator (F)

Bit devices other

than the above

(2) If the designated device is OFF, the device status will not change.

Operation Error

(1) In the following case, an operation error occurs, the error flag (SM0) turns ON, and an error

code is stored into SD0.

• The n-bit range from the

: Head number of the devices to be reset (bits)

: Number of the devices to be reset (BIN 16 bits)

Internal Devices

• Turns device n-points from annunciator (F) number designated by

• Deletes annunciator number turned OFF from SD64 to SD79 and compresses remaining data

• Stores number of annunciators stored from SD64 to SD79 at SD63.

• Sets the current value n-points from timer (T) or counter c designated by (C) to 0, and turns coil

contact OFF.

• Turns OFF coil or contact n-points from the device designated by

, or device exceeds the range of that device.

Redundant Universal

(Error code: 4101)

Show Quick Links

Table of Contents

Melsec l series