Three-Phase 600 V Class Drive Models 5A0003 To 5A0032 - YASKAWA P1000 Technical Manual

A.1 Power Ratings
u

Three-Phase 600 V Class Drive Models 5A0003 to 5A0032

Item
Drive Models
Maximum Applicable
<1>
Motor Capacity (HP)
Input Current (A)
<2>
Rated Voltage
Rated Frequency
Input
Allowable Voltage Fluctuation
Allowable Frequency
Fluctuation
Input Power
(kVA)
Rated Output
Capacity (kVA)
<3>
Rated Output
Current (A)
Output
Overload Tolerance
Carrier Frequency
Maximum Output Voltage (V)
Maximum Output
Frequency (Hz)
<1> The motor capacity (HP) refers to a NEC rated 4-pole motor. The rated output current of the drive output amps should be equal to or greater than
the motor current. Select the appropriate capacity drive if operating the motor continuously above motor nameplate current.
<2> Assumes operation at the rated output current. Input current rating varies depending on the power supply transformer, input reactor, wiring
connections, and power supply impedance.
<3> Rated motor capacity is calculated with a rated output voltage of 575 V.
<4> Carrier frequency default setting is Swing PWM 1 (C6-02 = 7). C6-02 settings 1, 7, 8, 9, and A do not require current derating. All other settings
raise the carrier frequency and require current derating.
400
Table A.7 Power Ratings (Three-Phase 600 V Class)
5A0003 5A0004
ND Rating 2 3
ND Rating 3.6 5.1
ND Rating 4.1 5.8
ND Rating
2.7 3.9
<4>
ND Rating
2.7 3.9
<4>
(Derating may be required for applications that start and stop frequently)
User-adjustable between 1 and 15 kHz
Specification
5A0006 5A0009 5A0011
5 7.5 10
8.3 12 16
Three-phase 500 to 600 Vac 50/60 Hz
-10 (-15) to +10%
±5%
9.5 14 18
6.1 9 11
6.1 9 11
ND Rating: 120% of rated output current for 60 s
<4>
Three-phase 500 to 600 V (proportional to input voltage)
400 Hz (user-set)
YASKAWA SIEP YAIP1U 01C AC Drive - P1000 Technical Manual
5A0017 5A0022 5A0027
15 20 25
23 31 38
26 35 43
17 22 27
17 22 27
User-adjustable between 1 and 10 kHz
5A0032
30
45
51
32
32
<4>