Three-Phase 200 V Class Drive Models 2A0250 To 2A0415 - YASKAWA P1000 Technical Manual

A.1 Power Ratings
u

Three-Phase 200 V Class Drive Models 2A0250 to 2A0415

Maximum Applicable Motor Capacity (HP)
Input Current (A)
Input
Allowable Frequency Fluctuation
Input Power (kVA)
Rated Output Capacity (kVA)
Rated Output Current (A)
Output
Maximum Output Frequency (Hz)
<1> The motor capacity (HP) refers to a NEC rated 4-pole motor. The rated output current of the drive output amps should be equal to or greater than
the motor current. Select the appropriate capacity drive if operating the motor continuously above motor nameplate current.
<2> Assumes operation at the rated output current. Input current rating varies depending on the power supply transformer, input reactor, wiring
connections, and power supply impedance.
<3> DC is not available for UL/CE standards.
<4> Rated motor capacity is calculated with a rated output voltage of 220 V.
<5> Carrier frequency default setting is Swing PWM 1 (C6-02 = 7). C6-02 settings 1, 7, 8, 9, and A do not require current derating. All other settings
raise the carrier frequency and require current derating.
396
Table A.3 Power Ratings Continued (Three-Phase 200 V Class)
Item
Drive Models
<1>
<2>
Rated Voltage
Rated Frequency
Allowable Voltage Fluctuation
<4>
ND Rating
ND Rating
Overload Tolerance
Carrier Frequency
Maximum Output Voltage (V)
2A0250
ND Rating 100
ND Rating 271
Three-phase 200 to 240 Vac 50/60 Hz/270 to 340 Vdc
ND Rating 124
<5> 95
<5>
250
ND Rating: 120% of rated output current for 60 s
(Derating may be required for applications that start and stop frequently)
Three-phase 200 to 240 V (proportional to input voltage)
YASKAWA SIEP YAIP1U 01C AC Drive - P1000 Technical Manual
Specification
2A0312 2A0360
125 150
324 394
-15 to 10%
±5%
148 180
119 137
312 360
User-adjustable between 1 and 10 kHz
400 Hz (user-set)
2A0415
175
471
<3>
215
158
415
<5>