YASKAWA P1000 Technical Manual page 354

7.4 Drive Cooling Fans
n Installing the Cooling Fan
Reverse the procedure describe above to reinstall the cooling fan.
1.
Install the replacement fan into the drive. Align the pins as shown in
2.
Properly connect the fan power lines then replace the power supply connectors and cables into the recess of the drive.
A – Back
3.
Angle the fan finger guard as shown in
drive.
4.
While pressing in on the hooks of the left and right sides of the fan finger guard, guide the fan finger guard until it clicks
back into place.
354
Figure 7.16 Install the Cooling Fan: 4A0088 and 4A0103
Figure 7.17 Cooling Fan Power Supply Connectors: 4A0088 and 4A0103
Figure 7.18
Figure 7.18 Reattach the Fan Finger Guard: 4A0088 and 4A0103
Figure
B – Front
and insert the connector tabs into the corresponding holes on the
Holes for connector tabs.
Fan finger guard
Four tabs
Back of Drive
Hook
Front of Drive
YASKAWA SIEP YAIP1U 01C AC Drive - P1000 Technical Manual
7.16.
A
B
Hook