Connecting Peripheral Devices; Connecting Peripheral Devices - YASKAWA P1000 Technical Manual

8.3

Connecting Peripheral Devices

Figure 8.1 illustrates how to configure the drive and motor to operate with various peripheral devices.
Refer to the specific manual for the devices shown below for more detailed installation instructions.
Power
Supply
Line
Breaker
(MCCB)
or
Leakage
Breaker
AC Reactor
Input Side
Noise Filter
Note: If the drive is set to trigger a fault output when the fault restart function is activated (L5-02 = 1), then a sequence to interrupt power when
a fault occurs will turn off the power to the drive while the drive attempts to restart. The default setting for L5-02 is 0 (fault output active
during restart).
YASKAWA SIEP YAIP1U 01C AC Drive - P1000 Technical Manual
USB Copy unit
Surge
Absorber
Drive
+2
+1
DC Link Choke
Ground
R/L1 S/L2 T/L3 U/T1V/T2W/T3
24 V control
power supply
unit
Figure 8.1 Connecting Peripheral Devices

8.3 Connecting Peripheral Devices

Engineering Software Tool
LCD Operator
USB Cable
(Type-AB)
PC
USB Type-AB Cable
(sold separately)
B1 B2
Braking Resistor
or Braking Resistor Unit
Output Side
Noise Filter
Motor
Ground
DriveWizard Industrial
8
377