Three-Phase 200 V Class Drive Models 2A0040 To 2A0211 - YASKAWA P1000 Technical Manual

u

Three-Phase 200 V Class Drive Models 2A0040 to 2A0211

Item
Drive Model
Maximum Applicable
<1>
Motor Capacity (HP)
Input Current (A)
Rated Voltage
Rated Frequency
Input
Allowable Voltage Fluctuation
Allowable Frequency Fluctuation
Input Power (kVA)
Rated Output Capacity
<4>
(kVA)
Rated Output Current (A)
Overload Tolerance
Output
Carrier Frequency
Maximum Output Voltage (V)
Maximum Output Frequency (Hz)
<1> The motor capacity (HP) refers to a NEC rated 4-pole motor. The rated output current of the drive output amps should be equal to or greater than
the motor current. Select the appropriate capacity drive if operating the motor continuously above motor nameplate current.
<2> Assumes operation at the rated output current. Input current rating varies depending on the power supply transformer, input reactor, wiring
connections, and power supply impedance.
<3> DC is not available for UL/CE standards.
<4> Rated motor capacity is calculated with a rated output voltage of 220 V.
<5> Carrier frequency default setting is Swing PWM 1 (C6-02 = 7). C6-02 settings 1, 7, 8, 9, and A do not require current derating. All other settings
raise the carrier frequency and require current derating.
YASKAWA SIEP YAIP1U 01C AC Drive - P1000 Technical Manual
Table A.2 Power Ratings Continued (Three-Phase 200 V Class)
2A0040 2A0056
ND Rating 15
<2>
ND Rating 52
ND Rating 27
<5>
15.2
ND Rating
<5>
40
ND Rating
Specification
2A0069 2A0081
20 25 30
68 80 96
Three-phase 200 to 240 Vac 50/60 Hz/270 to 340 Vdc
-15 to 10%
36 44 52
21 26 31
56 69 81
ND Rating: 120% of rated output current for 60 s
(Derating may be required for applications that start and stop frequently)
User-adjustable between 1 and 15 kHz
Three-phase 200 to 240 V (proportional to input voltage)
400 Hz (user-set)
A.1 Power Ratings
2A0110 2A0138 2A0169 2A0211
40 50 60
111 136 164
<3>
±5%
51 62 75
42 53 64
110 138 169
User-adjustable
<5> between 1 and
10 kHz
75
200
91
80
211
<5>
A
395