YASKAWA P1000 Technical Manual page 360

7.4 Drive Cooling Fans
A – Fan guard
B – Cooling fan
C – Fan unit case
n Cooling Fan Wiring
1.
Position the protective tube so the fan connector sits in the center of the protective tube.
2.
Place the fan connector covered by the tube as shown in
Cooling Fan B1
3.
Double-check the relay connector to ensure that it is properly connected.
n
Installing the Cooling Fan Unit
1.
Reverse the procedure described above to reinstall the cooling fan unit.
360
A
B
C
Figure 7.29 Fan Unit Disassembly: 4A0414
Protective tube
Cooling Fan B2 Cooling Fan B3
Figure 7.30 Cooling Fan Wiring: 4A0414
D – Circulation fan base
E – Circulation fan
Figure 7.30.
Connector Connector
for fan B1 for fan B2
YASKAWA SIEP YAIP1U 01C AC Drive - P1000 Technical Manual
D
E
Connector
for fan B3