Ricoh G-P3 Service Manual page 88

Adjustments
3
You can adjust 15 points for each color: (example [A]) between 0 (lowest density) [B] and 255 (highest
density) [C]. For each point, you can adjust the density within 0 and 255.
The gradation scales marked 'Default' are printed according to the default gamma settings in the flash
ROM in the controller. The gamma adjustment changes the densities at the adjustable points in the gradation
scale. The gradation scale marked "Current" shows the current settings.
Compare the "Current" gradation scale with the 'Default' at the time you do the adjustment procedure.
Select the density for each of the 15 adjustable points, excluding points 0 and 255, from the 'Default'
gradation scale.
The NVRAM holds three sets of controller gamma settings:
• Those saved this time: Controller SP 1101 ToneCtlSet - Tone (Current)
87