Ricoh G-P3 Service Manual page 232

3042 005 Step [Y]
3042 006 Adj. Remain: [K]
3042 007 Adj. Remain: [M]
3042 008 Adj. Remain: [C]
3042 009 Adj. Remain: [Y]
3042 014 Change Step: [K]
3042 015 Change Step: [M]
3042 016 Change Step: [C]
3042 017 Change Step: [Y]
3051 [Vt Thr.Setting] Vt Threshold Setting ([Color])
3051 001 Low Vt Thr.:[K]
3051 002 Low Vt Thr.:[M]
3051 003 Low Vt Thr.:[C]
3051 004 Low Vt Thr.:[Y]
3051 005 High Vt Thr.:[K]
3051 006 High Vt Thr.:[M]
3051 007 High Vt Thr.:[C]
3051 008 High Vt Thr.:[Y]
3101 [P. Sensor Patt.] ID Sensor Pattern Setting ([Color])
3101 001 Change Value: [K]
3101 002 Change Value: [M]
3101 003 Change Value: [C]
3101 004 Change Value: [Y]
3102 [P. Sensor Patt.] ID Sensor Pattern Setting ([Color])
*EGB
Displays the remaining Vtref value for each color.
[-5.00 to 5.00 / - / 0.01 V/step]
*EGB
Adjusts the density change rate of the ID sensor
*EGB
pattern for each color.
*EGB
[0 to 100 / 15 / 1%/step]
*EGB
*EGB
Sets the threshold of the lower limit Vt voltage for
*EGB
each color.
*EGB
[0.10 to 5.00 / 2.00 / 0.01 V/step]
*EGB
*EGB DFU
*EGB
Sets the threshold of the upper limit Vt voltage for
each color.
*EGB
[0.10 to 5.00 / 3.00 / 0.01 V/step]
*EGB
*EGB
Displays the density change rate of the ID sensor
*EGB
pattern for each color.
*EGB
[-100 to 100 / 0 / 1%/step]
*EGB
Service Mode Table
5
231