Ricoh G-P3 Service Manual page 247

5. Service Tables
3701 001 Low Resolution
3701 002 Threshold: [K]
3701 003 Threshold: [M]
3701 004 Threshold: [C]
3701 005 Threshold: [Y]
3721 [Low Resolution] Toner Refresh Mode Setting in Low Image Coverage Ratio
3721 001 Toner Refresh Mode
5
3721 002 S: Toner Refresh
3721 003 Toner refresh coef.
3721 004 Interval Bk
3721 005 Interval Col
3731 [SUM.ImageArea]
3731 001 [Bk]
3731 002 [M]
3731 003 [C]
3731 004 [Y]
3741 [Thr.SplyMthod]
3741 001 [Bk]
3741 002 [M]
246
[0 to 1 / 0 / -]
*EGB
0: Off, 1: On
*EGB
*EGB
[0 to 100 / 1 / 1%/step]
*EGB
*EGB
Enables or disables the toner refresh mode.
*EGB [0 or 1 / 0 / -]
0: On. 1: Off
Toner refresh mode is done if the percentage of
pages that have low image coverage is larger than
*EGB
this threshold value.
[0 to 50 / 20 / 1%/step]
Toner refreshing coefficient: DFU
*EGB
[0 to 100 / 100 / 1%/step]
*EGB Specifies the interval of the process control at low
coverage printing.
*EGB
[0 to 65535 / 0 / 1 sheet/step]
*EGB
Displays the total coverage for each color after the
*EGB
process control execution. This SP is cleared when
the process control is done.
*EGB
Value: pixel
*EGB
*EGB
Adjusts the threshold for low coverage printing.
[0 to 255 / 1 / 1%/step]
*EGB