Ricoh G-P3 Service Manual page 191

5. Service Tables
[Normal: [FC]: LE] Transfer roller current and discharge plate voltage for the leading
edge area of plain paper 1 in color mode
2426
Paper side: 1st or 2nd
2426 003 Separation
2426 007 T. Roll 2: 1st
2426 012 T. Roll 2: 2nd
[Normal: [FC]: TE] Transfer roller current and discharge plate voltage for the trailing edge
2428
area of plain paper 1 in color mode
2428 003 Separation
5
2428 007 T. Roll 2: 1st
2428 012 T. Roll 2: 2nd
[Normal2: [K]] Transfer roller current and discharge plate voltage for the image area of
plain paper 2 in B/W mode
(Process Speed, Paper Side, Unit) Process Speed -> RS: Regular speed,
2432
Paper Side: 1st or 2nd
Unit -> T.Roll2: Transfer roller, Separa.: Discharge plate (paper separation)
2432 007 RS: 1st: T. Roll 2
2432 008 RS: 1st: Separa.
2432 012 RS: 2nd: T. Roll 2
2432 013 RS: 2nd: Separa.
[Normal2: [K]] Transfer roller current and discharge plate voltage for the image area of
plain paper 2 in B/W mode
2433
(Process Speed, Paper Side) Process Speed -> LS: Low speed,
Paper Side: 1st or 2nd
2433 007 LS: 1st: T. Roll 2
190
*EGB [0 to 400 / 100 / 5%/step]
The value displayed on the LCD is different from
*EGB
these SP's values. For example, "20%" on the LCD
*EGB actually means 100%.
*EGB
[0 to 400 / 100 / 5%/step]
The value displayed on the LCD is different from
*EGB
these SP's values. For example, "20%" on the LCD
*EGB actually means 100%.
Adjusts the transfer roller current.
*EGB
[0 to 100 / 15.5/15.3 (NA/EU) / 0.1 -µA /
step]
Adjusts the discharge plate voltage.
*EGB
[0 to 4 / 2.0 / 0.1 -KV/step]
*EGB [0 to 100 / 15.3 / 0.1 -µA /step]
*EGB [0 to 4 / 2.0 / 0.1 -KV/step]
*EGB Adjusts the transfer roller current.