Ricoh G-P3 Service Manual page 112

SC
Symptom
[Level]
819 Kernel stop
Process error
[0696e]
[B]
System completely down
VM full error
[0766d]
Unexpected system memory
[B]
size
Cache error
[4361]
[B]
Cache error in the CPU
The others
[----]
[B]
Error in OS
820 Self-Diagnostic Error: CPU
[0001-0015] [000A-000D]: Detailed error code
During the boot monitor
program and self-diagnostic,
[B]
any exception or cut-in are not
supposed to happen. If these
happen, it is defined as SC.
Possible Cause/Required Action
• Defective RAM DIMM
• Defective controller
• Software error
1. Check and/or replace the RAM DIMM.
2. Replace the controller.
• Defective RAM DIMM
• Defective controller
• Software error
1. Check and/or replace the RAM DIMM.
2. Replace the controller.
• Defective CPU
1. Replace the controller board.
• Defective memory
• Defective flash memory
• Defective CPU
1. Replace the controller board.
• Defective CPU device
• Defective boot monitor program or self-diagnostic
program
1. Replace the controller board.
2. Reinstall the system firmware.
Service Call Conditions
4
111