Ricoh G-P3 Service Manual page 239

5. Service Tables
3411 003 Max. Print: [K]
3411 004 Max. Print: [Cl]
3411 005 Pixel: [K]
3411 006 Pixel: [Cl]
3501 [Process Cont.] Process Control
5
3501 001 ON/ OFF
3511 [Pntr. Display] Process Control Table Display ([Color])
3511 001 [K]
3511 002 [M]
3511 003 [C]
3511 004 [Y]
3521 [DEV.Potential] Development Potential Setting ([Color])
3521 001 [K]
3521 002 [M]
3521 003 [C]
3521 004 [Y]
3522 [DEV.Potential] Development Potential Setting ([Color])
3522 001 MAX [K]
3522 002 MAX [M]
238
Maximum: For low image coverage, more sheets
*EGB
can be printed. This sets the maximum that can be
printed after toner end is detected.
*EGB
[0 to 750 / 0 / 1/step] DFU
*EGB Adjusts the number of sheets (A4), which the pixel
area is converted into for the toner end after
detecting the toner near end.
*EGB
[0 to 100 / 0 / 1 sheet/step]
Sets the method of the process control.
[0 to 3 / 0 / 1/step]
*EGB 0: Auto, 1: Fixed
2: Auto + LS, 3: Auto (Table fixed)
Do not use settings 2 and 3.
*EGB
Displays the current process control table for each
*EGB
mode.
*EGB
[1 to 30 / 15 / 1/step]
*EGB
*EGB
*EGB
Displays the development bias for each color.
[1 to 800 / 0 / 1 V/step]
*EGB
*EGB
*EGB
Adjusts the maximum development bias for each
color.
*EGB