Ricoh G-P3 Service Manual page 282

7504 001 At Power On
7504 003 Tray 1: Non-feed
7504 004 Tray 2: Non-feed
7504 005 Tray 3: Non-feed
7504 006 By-pass: Non-feed
7504 007 Duplex: Non-feed
7504 008 Registration
7504 009 Fusing Exit
7504 010 Exit
7504 011 Inverter (F)
7504 012 Inverter (R)
7504 013 Duplex Exit
7504 015 Bank Paper Feed
7504 016 Fusing Entrance
7504 017 Tray4: Non-feed
7504 018 Bank Paper feed2
7504 061 Regist: Stay
7504 063 Exit: Stay
7504 065 Inverter (F): Stay
7504 066 Inverter (R): Stay
7504 070 Bank Paper 1: Stay
7504 071 Bank Paper 2: Stay
7504 072 Bank Paper 3: Stay
7506 [Paper Jam/Size]
7506 006 A5 LEF
*CTL Not used
*CTL Tray 1: Paper is not fed.
*CTL Tray 2: Paper is not fed.
*CTL Tray 3/LCT: Paper is not fed.
*CTL By-pass: Paper is not fed.
*CTL Duplex: Paper is not fed.
*CTL Registration Senor does not get "ON".
*CTL Fusing Exit Sensor does not get "ON".
*CTL Paper Exit Sensor does not get "ON".
*CTL Duplex: ON
*CTL Duplex Jam Sensor 1 does not get "ON".
*CTL Duplex Jam Sensor 2 does not get "ON".
*CTL Optional Paper Feed Sensor does not get "ON".
*CTL Fusing Entrance Sensor does not get "ON".
*CTL
*CTL
*CTL Registration Sensor does not get "OFF"
*CTL Paper Exit Sensor does not get "OFF".
*CTL Duplex: OFF
*CTL Duplex Exit 1: OFF
*CTL Not used
*CTL Not used
*CTL
Displays the number of jams according to the paper
*CTL
size.
Service Mode Table
5
281