Ricoh G-P3 Service Manual page 276

5860 003 SMTP Auth.
5860 006 SMTP Auth Encryp
5860 007 POP before SMTP
5860 008 POP to SMTP Wait
5860 009 Mail Receive Pro
5860 013 POP3/IMAP4 Auth.
5860 014 POP3 Srvr Port No.
5860 015 IMAP4 Srv Port
5860 016 SMTP Rx Port No
5860 017 Mail Rx Interval
Enables or disables the SMTP authentication for
mail transfers.
*CTL
[0 or 1 / 0 / 1/step]
0: Disable, 1: Enable
Encrypts or does not encrypt passwords for POP3/
IMAP4 authentications.
*CTL
[0 to 2 / 0 / 1/step]
0: Automatic, 1: Not encrypt, 2: Encrypt
Enables or disables the authentication that is
executed on the POP server before the
communication is established with the SMTP server
*CTL
to transfer mails.
[0 or 1 / 0 / 1/step]
0: Disable, 1: Enable
Adjusts the waiting time to access the SMTP server
after the authentication on the POP server.
*CTL
[0 to 10000 / 300 / 1 ms/step]
Sets the protocol of receiving e-mail.
*CTL [1 to 3 / 1 / 1/step]
1: POP3, 2: IMAP4, 3: SMTP
Encrypts or does not encrypt passwords for POP3/
IMAP4 authentications.
*CTL
[0 to 2 / 0 / 1/step]
0: Automatic, 1: Not encrypt, 2: Encrypt
Adjusts the port number of the POP server.
*CTL
[1 to 65535 / 110 / 1/step]
Adjusts the port number of the IMAP4 server.
*CTL
[1 to 65535 / 143 / 1/step]
Adjusts the port number of the SMTP server.
*CTL
[1 to 65535 / 25 / 1/step]
Adjusts the interval of receiving an e-mail.
*CTL
[2 to 1440 / 3 / 1 minute/step]
Service Mode Table
5
275