Ricoh G-P3 Service Manual page 254

5515 007 Machine Infomat
5515 008 Alarm Notice
5515 009 Non Genuine Tonn
5515 010 Supply Automatic
5515 011 Supply Managemen
5801 [Memory Clear]
5801 001 All
5801 002 Engine
5801 003 SCS
5801 004 IMH
5801 005 MCS
5801 008 Printer
5801 010 GWWS/NFA
5801 011 NCS
5801 014 DCS Setting
5801 015 Clear UCS Setting
5801 016 MIRS Setting
5801 017 CCS
[0 or 1 / 1 / - ] 0: OFF, 1: ON
This SP activates the machine information call.
*CTL
[0 or 1 / 1 / - ] 0: OFF, 1: ON
*CTL [0 or 1 / 0 / - ] 0: OFF, 1: ON
This SP activates the non genuine toner bottle call.
*CTL
[0 or 1 / 1 / - ] 0: OFF, 1: ON
This SP activates the automatic supply order call.
*CTL
[0 or 1 / 0 / - ] 0: OFF, 1: ON
This SP activates the supply management call.
*CTL
[0 or 1 / 0 / - ] 0: OFF, 1: ON
Resets the SP5801-002 through 016 except the
- security related data in 003, 010, 011and 015.
These cannot be reset with SP mode.
- Resets or deletes the engine-related data.
- Clears the system settings.
- Clears IMH data. DFU
- Clears MCS data. DFU
- Clears the printer application settings.
Clears the web service data and the network
-
application data.
Initializes the system default and interface settings
(IP address also), SmartNetMonitor for Admin,
-
WebStatusMonitor settings, and the TELNET
settings.
- Resets or deletes the DCS-related data.
- Resets or deletes the UCS-related data.
- Resets or deletes the MIRS-related data.
- Resets or deletes the CSS-related data. FA
Service Mode Table
5
253