Ricoh G-P3 Service Manual page 265

5. Service Tables
5828 090 TELNET (0: OFF, 1: ON) *CTL
5
5828 091 Web (0: OFF, 1: ON)
5828 145 Active IPv6 Link
5828 147 Active IPv6 Stat (1)
5828 149 Active IPv6 Stat (2)
5828 151 Active IPv6 Stat (3)
5828 153 Active IPv6 Stat (4)
5828 155 Active IPv6 Stat (5)
5828 156 IPv6 Manual Addr
5828 158 IPv6 Gateway Add
5832 [HDD] HDD Initialization
5832 001
264
0: Off, 1: On
Bit switches:
• Bit 0: LPR
• Bit 1: FPT
• Bit 2: IPP
• Bit 3: SMB
• Bit 4: Not used.
• Bit 5: DIPRINT
• Bits 6 and 7: Reserved
Enables or disables Telnet.
[0 or 1 / 1 / 1/step]
0: Disabled, 1: Enabled
Enables or disables the Web monitor.
*CTL [0 or 1 / 1 / 1/step]
0: Disabled, 1: Enabled
Displays the IPv6 link local address for the wireless
LAN or Ethernet.
Displays the IPv6 stateless address 1 to 5 for the
wireless LAN or Ethernet.
Displays the IPv6 manual setting address for the
wireless LAN or Ethernet.
Displays the IPv6 gateway address for the wireless
LAN or Ethernet.
Prepares the hard disk. Use this SP mode only when
#
there is a hard disk error.