Ricoh G-P3 Service Manual page 165

5. Service Tables
Adjusts the duration of the fusing-unit roller rotation
Prerotat. Temp.
1912 005
Fusing idling is not done if the fusing unit temperature is above this value.
Prerotat. Inter.
1912 006
Adjusts the duration of fusing idling immediately after the power is turned on.
Ex. Rotation Time
1912 007
Adjusts the time for extra rotation of the fusing unit rollers at the end of a job. If the fusing
motor stops before the fusing lamp turns off, the temperature can become very high.
Prerotat. Ext.
1912 008
5
Adjusts the additional time for pre-rotation of the fusing rollers.
TC1: Rotat. Ext.
1912 010
Adjusts the additional time of the fusing roller pre-rotation for thick paper 1.
TC2 Rotat. Ext.
1912 011
Adjusts the additional time of the fusing roller pre-rotation for thick paper 2.
OHP: Rotat. Ext.
1912 012
Adjusts the additional time of the fusing roller pre-rotation for OHP.
SP: Rotat. Ext.
1912 013
Adjusts the additional time of the fusing roller pre-rotation for special paper.
GL: Rotat. Ext.
1912 014
Adjusts the additional time of the fusing roller pre-rotation for glossy paper.
LL: RotSpd. Sel
1912 015
Turns on or off the rotation speed switching of the pre-rotation in LL condition.
When the "ON" is set, pre-rotation speed is the one-third of normal speed.
LM: RotSpd. Select
1912 016
Turns on or off the rotation speed switching of the pre-rotation in LM condition.
164
*EGB [0 to 200 / 100 / 1deg /step]
*EGB [0 to 180 / 1 / 1 min/step]
*EGB [0 to 10 / 5 / 1 sec/step]
*EGB [0 to 255 / 0 / 1 sec/step]
*EGB [0 to 255 / 10 / 1 sec/step]
*EGB [0 to 255 / 15 / 1 sec/step]
*EGB [0 to 255 / 15 / 1 sec/step]
*EGB [0 to 255 / 15 / 1 sec/step]
*EGB [0 to 255 / 10 / 1 sec/step]
[0 or 1 / 1 / 1]
*EGB
0: OFF, 1: ON
[0 or 1 / 1 / 1]
*EGB
0: OFF, 1: ON