Ricoh G-P3 Service Manual page 190

2408 021 LS: 2nd: T. Roll2
2408 022 LS: 2nd: Separa.
[Normal:[K]:LE] Transfer roller current and discharge plate voltage for the leading edge
area of plain paper 1 in B/W mode
2421
Paper Side: 1st or 2nd
Unit -> T.Roll2: Transfer roller, Separation: Discharge plate (paper separation)
2421 003 Separation
2421 007 T.Roll2: 1st
2421 012 T.Roll2: 2nd
[Switch Timing] Switch timing from leading edge to normal, plain paper 1
2422
(Paper Type, Edge) Paper Type -> N: Normal LE: Leading Edge
2422 002 T. Roll 2: N: LE
2422 003 Separation: N: LE
[Normal: [K]: TE] Transfer roller current and discharge plate voltage for the trailing edge
area of plain paper 1 in B/W mode
2423
Paper side: 1st or 2nd
Unit -> T.Roll2: Transfer roller, Separation: Discharge plate (paper separation)
2423 003 Separation
2423 007 T. Roll 2: 1st
2423 012 T. Roll 2: 2nd
[Switch Timing] Switch timing from normal to trailing edge, plain paper 1
2424
(Paper Type, Edge) Paper Type -> N: Normal, Edge ->TE: Trailing Edge
2424 002 T. Roll 2: N: TE
2424 003 Separation: N: TE
[0 to 4 / 2.0 / 0.1 -KV/step]
[0 to 100 / 18.3/19.5 (NA/EU) / 0.1 -µA /
*EGB
step]
*EGB [0 to 4 / 2.0 / 0.1 -KV/step]
*EGB
[0 to 400 / 100 / 5%/step]
The value displayed on the LCD is different from
*EGB
these SP's values. For example, "20%" on the LCD
*EGB actually means 100%.
*EGB [0 to 200 / 10 / 1 mm/step]
*EGB [0 to 200 / 25 / 1 mm/step]
*EGB [0 to 400 / 100 / 5%/step]
The value displayed on the LCD is different from
*EGB
these SP's values. For example, "20%" on the LCD
*EGB actually means 100%.
*EGB [0 to 200 / 10 / 1 mm/step]
*EGB [0 to 200 / 30 / 1 mm/step]
Service Mode Table
5
189