Ricoh G-P3 Service Manual page 280

5924 [SDK Apli Display] SDK Application Display
5924 001 SDK Appli Display
5930 [Meter Click Ch.] Meter Click Charge
5930 001 Meter Click Ch.
5930 010 PCU
5930 014 Mid Trans Unit
5930 016 Fusing Unit.
5990 [SP Print Mode]
5990 001 All (Data List)
5990 002 SP (Mode Data List)
5990 004 Logging Data
Enables or disables the LCD display of the SDK
application.
*CTL
[0 or 1 / 0 / 1/step]
0: Not display, 1: Display
Enables or disables the Meter Charge mode. When
enabling the Meter Charge mode, the "Counter"
menu is added to the user menu.
*EGB
[0 or 1 / 0 / -]
0: OFF, 1: ON
Displays or does not display the end display for the
PCU. This SP is activated only when the
SP5930-001 is set to "1".
*EGB
[0 or 1 / 0 / -]
0: OFF, 1: ON
Displays or does not display the end display for the
transfer belt unit. This SP is activated only when the
SP5930-001 is set to "1".
*EGB
[0 or 1 / 0 / -]
0: OFF, 1: ON
Displays or does not display the end display for the
fusing unit. This SP is activated only when the
SP5930-001 is set to "1".
*EGB
[0 or 1 / 0 / -]
0: OFF, 1: ON
Does SP5-990-002, 004, 005, 006, and 007.
Prints an SMC report on all SP modes.
Prints an SMC report on the SPs that save logs.
Service Mode Table
5
279